EDGEBANDERS FROM CAMCO

F370
  • 18 m/min Feed Rate 

  • Touch Screen

  • optional pre-milling unit 

  • Hot melt Glue Tank

  • 3 Pressure Rollers

  • Top & Bottom Rough Trimming Unit 

  • Top & Bottom Radius Trimming Unit 

  • Radius Scraping Unit 

  • Buffing Unit

Glue Pot, Edge Feeding and Pressure Zone

  The glue pot consists of a quick melting system and a heated application roller.

  Controlled via a digital thermostat.

  Edge feeding for materials 0.4 to 3mm

  Guillotine for edging up to 3mm.

  Pressure roller system consisting of 4 rollers. First roller being driven then

  rollers 2, 3, 4 are free running with independent pressure adjustment.

  automatic adjustment if fitted with an optional encoders

  End trim Unit

  Two independent high frequency motors are fitted to trim the front and rear edges.

  Trimmers are positioned using a precision linear slide way system enabling accurate trimming of panel.

  Simple manual adjustment for accurate trimming.

  Supplied complete with saw blades.

  Motor power 2 x 0.37 KW

  12000 RPM

  Rough Trimming Unit

  Two independent high frequency motors are fitted to trim the top and bottom of panel.

  Independent tracing wheels for accurate machining of edging.

  Fully adjustable tracing wheels for accurate machining of edging.

  Supplied complete with straight cutters.

  Motor power 2 x 0.75KW

 

Fine Trimming Unit

  Two independent high frequency motors are fitted to trim top and bottom of panel.

  Manual tilt movement between 0 and 10° for angled trimming of edging.

  Independent tracing wheels for accurate machining of edging.

  Fully adjustable tracing wheels for accurate machining of edging.

  Supplied complete with straight or radius cutters.

  Motor power 2 x 0.75KW

  RPM 18000

  Edge Scraping

  Unit complete with two cutting knives.

  Mechanical digital readouts for fine adjustment.

  Mounted on a heavy-duty framework to insure accuracy.

  Chrome plated positioning pads for accurate adjustment of cutting knives.

  Knives are 3mm radius for PVC and ABS edges.

  Brushing Unit

  Fitted with two independent motors.

  Two cloth polishing wheels.

  Manual adjustment for raising and lowering the unit.

 

Technical Specification:

Panel Thickness:                        10-50mm
Panel Width Min:                         60mm
Panel Length Min:                      175mm (pvc)
Edge Width:                               15-65mm
Edge Thickness:                        0.4 to 3mm
Feed Speed:                              0 - 18 m/min
Frequency Converter:                200Hz
Installed Power:                         8.75kw
Pneumatic Power:                     0.6MPa
Net weight:                               1000kg
Overall dimensions:                  3200mm L x 760mm W x 1400mm H

© 2017 CAMCO UK LIMITED

  • LinkedIn - White Circle
  • Facebook - White Circle

Tel: +44 289 264 6688

orders@camco.uk